Column-Type Fixed Pressure Vessel Cylinder

Q: Is this product the same as SCHWERLL's seamless-formed or welded fixed-vessel ranges?

SCHWERLL lists column-type vessels as a separate product family from its seamless-formed and welded fixed-vessel ranges. The supplied vessel family and configuration must be confirmed in the approved quotation and drawing.

Q: What pressure and vessel capacity are available?

Pressure and vessel capacity are configuration-specific for the supplied column-type vessel and must be confirmed in the approved quotation, drawing and technical documentation.

Q: What material, connection and gas-medium requirements should be confirmed?

Material, connection interface, gas medium, temperature and compatibility requirements must be confirmed for the supplied configuration in the approved quotation, drawing and project specification.

Q: What inspection and documentation should be specified before ordering?

Applicable design-code, inspection, testing and documentation requirements should be defined for the project and destination and confirmed in the approved supply documentation.

Schwerll Fluid Control Technical Division

Schwerll Industrial Fluid Power Equipment - Standard Column Type Pressure Vessel Gas Cylinder

Preliminary Sizing Calculator

Use our online calculator for preliminary polytropic volume estimates. High-pressure final sizing requires engineering verification and real-gas compressibility correction.

Preliminary Hydraulic Sizing Calculator →

Standards & Regulatory Review Alignment:

🏆 ISO 9001:2015 QMS ⚙️ ASME Sec. VIII Review 🇪🇺 PED / CE Review 🌐 Regional Review

Fixed-capacity gas cylinder

Model / SKU: SCH-1028 | Validation: Hydrostatic Proof Tested

SCHWERLL column-type fixed pressure-vessel cylinders configured to project-specific pressure, capacity, material, interface, inspection and documentation requirements.

20 to 35 MPa Pressure Capability

50 L to 2,000 L Capacity Sizing

-20°C to +80°C Temp (Duty Dependent)

Hydrostatic Proof Tested Quality Validation

Direct Factory Technical Inquiry & Fast RFQ

Contact Schwerll engineering sales directly for custom volume sizing, pressure ratings, material compatibility and volume pricing.

💬 WhatsApp Chat

⏱️ Fast RFQ Response • 🧪 Hydrostatic Proof Tested (Per Applicable Spec) • 🔒 Strict NDA Protection

Column-Type Fixed Pressure Vessel Cylinder Overview

SCHWERLL column-type fixed pressure-vessel cylinders are project-configured stationary pressure-vessel products. Final pressure, capacity, material, connection interfaces, operating-medium requirements, inspection scope and documentation requirements are confirmed for the approved project configuration.

Construction / Form

Column-type fixed pressure-vessel cylinder.

Configuration

Pressure and capacity are project defined. Material selection, operating-medium compatibility and connection interfaces are confirmed for the supplied configuration.

Quality & Documentation

SCHWERLL operates under an ISO 9001:2015 corporate quality management system. Inspection, testing and documentation requirements are defined according to the approved vessel configuration and agreed project quality scope.

Design-Code Review

Applicable pressure-vessel design-code, conformity-assessment and documentation requirements are reviewed according to project specification and destination.

Frequently Asked Questions

Direct technical answers from Schwerll fluid power application engineers regarding Column-Type Fixed Pressure Vessel Cylinder.

01 What is the SCHWERLL Column-Type Fixed Pressure Vessel Cylinder? −

It is a fixed pressure-vessel cylinder in SCHWERLL's column-type vessel family. The final supplied configuration must be confirmed in the approved project documentation.

02 Is this product the same as SCHWERLL's seamless-formed or welded fixed-vessel ranges? +

03 What pressure and vessel capacity are available? +

04 What material, connection and gas-medium requirements should be confirmed? +

05 What inspection and documentation should be specified before ordering? +

International Pressure Vessel Certifications & Engineering Standards

Schwerll accumulators and pressure vessels are engineered in compliance with major international codes based on client specifications and deployment jurisdiction. Official certificates, 3.1 material test reports, and third-party inspection witness are provided per order.

🏆

ISO 9001:2015 QMS

Corporate Quality Management System (QMS) certification governing engineering design, raw material traceability, precision manufacturing, and pressure testing.

⚙️

ASME Section VIII

ASME Section VIII design compliance review, engineering calculations and documentation support are evaluated according to project technical specification and destination requirements.

🇪🇺

CE Pressure Equipment Directive

European Pressure Equipment Directive (PED 2014/68/EU) conformity-assessment requirements and documentation routes are reviewed according to destination market and project scope.

📜

China Pressure Equipment Context

Applicable China pressure-equipment regulatory and product-standard requirements are reviewed according to product configuration and project scope.

🌏

Multi-National Registrations

Technical documentation and calculation dossiers can be reviewed for CU-TR/EAC (Eurasian Union), NR13 (Brazil), AS1210 (Australia), KOSHA (Korea), and DOSH (Malaysia).

🔬

Third-Party Inspection (TPI)

Independent third-party inspection (TPI) and witness testing can be arranged with classification societies and inspection agencies (DNV, LR, BV, SGS, TÜV).

Custom Engineering & Ordering Flow

Technical Parameter Submission

Provide system operating pressures (P1/P2/P0), effective gas volume, cycle frequency, hydraulic fluid type, and ambient temperature range.

Computerized Volume Sizing Support

Our application engineering team provides technical review and sizing verification based on client operating parameters, including thermal dissipation and real-gas compressibility correction for high-pressure applications.

Approval Drawing & Quotation

Quotation packages, general arrangement drawings, nozzle/flange connection details, and commercial terms are prepared upon engineering review of operating duty cycles.

Fabrication & Quality Inspection

Precision honed cylinder bore for low-friction operation, ultrasonic testing (UT) of forged shells, and hydrostatic proof pressure testing per applicable pressure vessel code (such as ASME Section VIII or EN 14359 / PED) and approved project inspection scope.

Export Packing & Global Delivery

Solid wooden crating with desiccants, rust preventative oil, and transport protection per contract specification. Incoterms: FOB, CIF, or DAP per project agreement.

Direct Engineering Desk

📞 +86 133-0228-9861 💬 WhatsApp Online ✉ info@schwerll.store

Standard ConfigurationsTypical 2–4 Weeks

Project-Certified (ASME/PED)Typical 6–8 Weeks

Custom / Large-CapacityTypical 8–12 Weeks

Complete Accumulator StationProject-Specific Schedule

Column-Type Fixed Pressure Vessel Cylinder

Column-Type Fixed Pressure Vessel Cylinder

Direct Factory Technical Inquiry & Fast RFQ

Product Specifications & Engineering Data

Column-Type Fixed Pressure Vessel Cylinder Overview

Construction / Form

Configuration

Quality & Documentation

Design-Code Review

Frequently Asked Questions

International Pressure Vessel Certifications & Engineering Standards

ISO 9001:2015 QMS

ASME Section VIII

CE Pressure Equipment Directive

China Pressure Equipment Context

Multi-National Registrations

Third-Party Inspection (TPI)

Custom Engineering & Ordering Flow

Direct Engineering Desk

Related Products & Hydraulic Components

Liquid-Side Measurement System

Mobile Nitrogen Gas Booster Charging Cart

Standard bladder-type accumulator system

Gas Safety Valve & Rupture Disc

Request an Engineering Quote & Technical Specifications